How to Guide

37
PRODUCT DATA
PVC Sewer and Drain Pipe
Perforated pipe is supplied with two rows of 1/2” diameter holes every five inches. Rows are parallel to the pipe
axis and are 120° apart.
Weight is approximate and is for shipping purposes only.
NOTE: For truckloads of mixed sizes, multiply skids desired by truckload percent per skid.
Pipe listed in this section meets or exceeds the requirements of ASTM D 2729.
PVC 30030 3 ” x10’ 10903 810’ 3.125 3.250 0.070 1.50 52.8 $ 110.00
PVC 30040 4 ” x10’ 10905 500’ 3.125 4.215 0.075 1.75 70.4 $ 130.00
>> PVC ASTM D 2729 Pipe
SOLVENT WELD BELLED END ASTM D 2729
TRUCKLOAD
PART NO. NOM. SIZE UPC # QTY. PER PERCENT AVG. OD (IN.) MIN. WALL (IN.) BELL DEPTH WT. PER LIST PRICE
611942- SKID PER SKID (IN.) 100 FT. (LBS.) PER 100 FT.
PVC 30030P 3 ” x10’ 11814 1040’ 4.160 3.250 0.070 1.50 52.8 $ 110.00
PVC 30040P 4 ” x10’ 11815 500’ 3.125 4.215 0.075 1.75 70.4 $ 130.00
>> Perforated PVC ASTM D 2729 Pipe
SOLVENT WELD BELLED END ASTM D 2729
TRUCKLOAD
PART NO. NOM. SIZE UPC # QTY. PER PERCENT AVG. OD (IN.) MIN. WALL (IN.) BELL DEPTH WT. PER LIST PRICE
611942- SKID PER SKID (IN.) 100 FT. (LBS.) PER 100 FT.
NOT FOR PRESSURE
Do not use PVC Sewer pipe for pressure applications. The
use of sewer pipe in pressure applications may result in
system failure and property damage.
Failure to follow safety precautions may result in
misapplication or improper installation and testing which
can cause severe personal injury and / or property damage.
Primers and cements are extremely flammable and may
be explosive. Do not store or use near heat or open
flame, or death or serious injury may occur.
• Solvent fumes created during the joining process are
heavier than air and may be trapped in newly installed
piping systems.
• Ignition of the solvent vapors caused by spark or flame
may result in injury or death from explosion or fire.
• Read and obey all manufacturers' warnings and any
instructions pertaining to primers and cements.
• Provide adequate ventilation to reduce fire hazard and
to minimize inhalation of solvent vapors when working
with cements, primers and new piping systems.