Replacement Part List

SAFETY DATA SHEET
PVC Pipe and Fittings
Date Updated: 10/05/2020
Page 2 of 9
This document has been classified as Public
Hazard statements
Causes serious eye irritation.
Causes skin irritation.
May cause respiratory irritation.
Suspected of causing cancer. Route of exposure: inhalation of airborne unbound particles of
respirable size.
Precautionary statements
Prevention
Avoid breathing dust/fume/gas/mist. Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Wear protective respiratory protection.
Response
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention.
Storage
Keep away from intense heat, flames. Store locked up.
Disposal
Dispose of in accordance with local regulations.
Hazards not otherwise
classified
None known.
Relevant routes of
exposure
Skin, eyes, inhalation.
Inhalation
Melted product is flammable and produces intense heat and dense smoke during burning.
Irritating gases and fumes may be given off during burning or thermal decomposition.
Inhalation of airborne unbound particles of respirable size may cause cancer.
Skin contact
Gases and fumes evolved during thermal processing or decomposition can cause skin
irritation.
Eye contact
Dust can cause eye irritation. Gases and fumes evolved during thermal processing or
decomposition can cause eye irritation.
Ingestion
No data available.
3. HAZARDOUS INGREDIENTS: COMPOSITION/INFORMATION
INGREDIENT
CAS
NUMBER
%
WEIGHT
Polyvinyl chloride
9002-86-2
> 80%
Titanium dioxide
13463-67-7
0-5%
4. FIRST AID MEASURES
EYE CONTACT: Immediately flush eyes with plenty of water occasionally lifting the upper and lower eyelids. Check for and
remove any contact lenses. Continue to rinse for at least 15 minutes. Consult a physician.
SKIN CONTACT: Rinse with water. Remove contaminated clothing and shoes. In the event of any complaints or symptoms,