Installation Guide

blade arm
blade
blade attachment
screws/lock washers
page 7
9. Blade Assembly.
WARNING: To reduce the risk of serious bodily
injury, DO NOT use power tools to assemble
the blades. If overtightened, blades may crack
and break.
Time Saver: Washers for blade screws can be
set on each blade screw prior to installing
blades.
Locate 15 blade attachment screws and
washers in hardware packs. Hold blade arm up
to blade and align holes. Insert 3 blade
attachment screws (along with washers) with
fingers first and then tighten screws securely
with a Phillips screwdriver. Repeat procedure
for the remaining blades.
Remove blade arm screws/lock washers from
underside of motor. If plastic motor locks are
installed with blade arm screws, discard plastic
motor locks (save blade arm screws/lock
washers to secure blade arms). Align blade arm
holes with motor screw holes and attach blade
arm with blade arm screws/lock washers.
Before securing screws permanently, repeat
this procedure with remaining blade arms.
Securely tighten all screws.
NOTE: Tighten blade arm screws twice a year.
10. Light Kit Assembly.
Remove 1 screw from motor plate on underside
of motor housing and partially loosen the other
2 screws. Align slotted holes in fitter plate with
loosened screws in motor plate, allowing male
plug from motor housing to come through hole
in middle of fitter plate. Twist fitter plate to lock.
Re-insert screw that was just removed and
securely tighten all 3 screws with a Phillips
screwdriver.
Remove 3 screws from outer edge of fitter plate.
Connect male plug from motor housing to
female plug from the light kit fitter, matching up
the colors on the female plug with the colors on
the male plug for correct fit. Be sure that plugs
connect securely. Align holes in light kit fitter
with holes in fitter plate. Re-insert screws that
were previously removed and tighten all 3
screws securely with a Phillips screwdriver.
["Light Kit Assembly" continued on next
page.]
motor
housing
motor
housing
plastic
motor
lock
light kit fitter
fitter plate
male plug
female plug
blade arm screws/
lock washers
motor housing
motor
plate
male plug
fitter plate