Installation Manual

14
LIGHT KIT INSTALLATION - (Bowl Light Kit)
Remove the hex nut and spring
washer from the threaded rod at the
top of the light kit. Then, remove the
plug button from the switch housing
cap.
Thread the single-pin connectors
through the hole in the switch and
twist the switch housing cap onto the
threaded rod at the top of the light
kit. Then, secure the switch housing
cap to the light kit by reinstalling the
spring washer and hex nut.
1. Remove hex nut and spring
washer from light kit.
2. Secure the switch housing cap
to the light kit.
3. Remove the nial, nial cap,
hex nut, and rubber washer.
Single-pin
Connector
Plug Button
Switch
Housing Cap
Switch
Housing Cap
Hex Nut
Hex Nut
Hex Nut
Finial Cap
Finial
Spring Washer
Spring Washer
Rubber Washer