Installation & Assembly

CEILING FAN

TOOLS REQUIRED

CAUTION

Assembly Instructions

Wire

strippers

Ladder

Safety

glasses

Electrical

tape

Phillips

screwdriver

PliersFlat blade

screwdriver

• Inspect the wire insulation for any cuts,

abrasions, or exposed copper that may have

resulted during shipping. If there is a defect in

the wire, do not attempt installation.

• Before starting installation of this ﬁxture or

removal of a previous ﬁxture, disconnect the

power by turning o the circuit breaker or by

removing the fuse at the fuse box.

• To reduce the risk of ﬁre, electric shock, or

personal injury, mount the fan to an outlet box

marked acceptable for fan support using the

screws provided with the outlet box. An outlet

box commonly used for the support of lighting

ﬁxtures may not be acceptable for fan support

and may need to be replaced.

• Make sure that the fan voltage (120) is

compatible with your own electrical system.

page 1

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

Socket Ring

Fan Motor Assembly Blades Blade Arms Light Kit

Shade Mounting Unit Wire Nuts

PAGE 1
CEILING FAN Assembly Instructions CAUTION • Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. • Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
CEILING FAN Assembly Instructions STEP 1 Slide the mounting unit onto the screws of the junction box (not included). STEP 2 Connect the blue and black wires of the fan to the black supply wire. Connect the white fan wire to the white supply wire. Conect the fan ground wire to the ground supply wire and the ground wire from the mounting unit.