Assembly Instructions
1.
CAREFULLY UNPACK AND PLACE ALL PARTS ON A SMOOTH
SURFACE AND LAY THEM UP AS PER THE SKETCH.
2.
INSERT THE HARP TO SADDLE ON BASE.
3.
PUT THE SHADE OVER HARP.THEN TIGHT THE FINIAL .
4.
INSTALL BULB AND INSERT THE POWER PLUG
INTO PLUG TO USE.
Recommended (1) 3-WAY 150 WATT Type “A” Bulb
Or (1) maximum 13WATT CFL Bulbs (Bulbs not included)
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY
.
INSTRUCTIONS