Operation Manual

21
Operation of appliances
LCD
?
Our different models are equipped with different types of control panels; these are usually situated near the cooking unit.
Mark 1:
Button to check the leisure battery (B2)
and the car battery (B1).
Press the button once and you will see the
charge of the battery B1 and twice you will
see the charge of the battery B2.
Mark 2:
Button to check the drink water tank
and for drinking water refilling function
operation.
Press this button and you will see the
level of drink water tank with help of the
leds (4).
Mark 3:
Buttons to switch the lights on and off .
In order to have lights in this vehicle,
the main switch must be turned on.
Mark 4:
LED display
- Voltmeter for the control of car
and leisure battery voltage (scale
0 to 100%).
- Drinking water tank level
(Emergency level, 1/3, 2/3, 3/3).
Mark 5:
Mains’ general button ON/OFF and security
relay; LED flashing indicates that the battery
is low and that the low voltage device will
turn on.
Note: At start-up, the panel verifies the
functioning of all LEDs with the
exclusion of ref. 10 and 11.
Mark 6:
Button light button; this awning light
switches automatically off when you
start up the engine
.
Mark 7:
Water pump button; it controls the
pump relays.
Its functioning is indicated by an orange
led placed next to the button. It depends
on the main switch.
Mark 8:
If this symbol blinks the leisure battery
(B2) has run down
.
Mark 9:
If this symbol blinks the car battery (B1)
has run down.
Mark 10:
It shows the leisure battery recharging
through engine alternator.
Mark 11:
Led to signal 230V net on.
Mark 12:
If this symbol blinks, the drink water
tank is empty.
Mark 13:
If this symbol blinks, the wastewater
tank is full.
CONTROL AND INSTRUMENTATION PANEL
!"#$%&'%() to ensure all functions, battery charging, sensor, pump, etc.. It is essential that the control panel is
turned on (Table 5 PC 150 TR Button, Button 152 NE Table 1).
Model PC 150 TR