USER MANUAL Model ID: MAVERICKFORCESPROFILE
Edition Notes The Maverick Force s Profile User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Maverick Force s Profile as of the release date of this edition. Trademarks CHAUVET, the Chauvet logo, and Maverick Force s Profile are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries.
Table of Contents TABLE OF CONTENTS 1. Before You Begin ......................................................................................... What Is Included ...................................................................................................... Claims ...................................................................................................................... Text Conventions .....................................................................................................
Table of Contents Pan Angle....................................................................................................................... Tilt Angle ........................................................................................................................ Blackout on Movement................................................................................................... Touchscreen Calibration .........................................................................................
Before You Begin 1. Before You Begin What Is Included • • Maverick Force s Profile Seetronic Powerkon IP65 power cord • • 2 Omega brackets with mounting hardware Quick Reference Guide Claims Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet.
Before You Begin Safety Notes Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product. This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs. All applicable local codes and regulations apply to proper installation of this product.
Introduction 2.
Introduction Product Dimensions 14.2 in 360 mm 10.8 in 275 mm 17.4 in 443 mm 25.1 in 636 mm 13.4 in 340 mm 4.4 in 113 mm 12.2 in 310 mm 9.2 in 234 mm 17.5 in 443 mm 20.4 in 518 mm 8.9 in 225 mm Page 4 of 31 Maverick Force s Profile User Manual Rev.
Setup 3. Setup AC Power The Maverick Force s Profile has an auto-ranging power supply, and it can work with an input voltage range of 100 to 240 V~, 50/60 Hz. To determine the product’s power requirements (e.g., circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Setup Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/. Orientation Always mount this product in a safe position, making sure there is adequate room for ventilation, configuration, and maintenance. Rigging Chauvet recommends using the following general guidelines when mounting this product.
Setup Signal Connections The Maverick Force s Profile can receive a DMX, Art-Net™, or sACN, signal. The Maverick Force s Profile has 2 Amphenol XLRnet through ports, and 3- and 5-pin DMX in and out ports. If using other compatible products with this product, you can control each individually with a single controller. Control Personalities The Maverick Force s Profile uses a 3 or 5-pin DMX data connection, WDMX, Art-Net™, or sACN for its two control personalities: Dmx Mode 31 CH and Dmx Mode 47 CH.
Operation 4. Operation Touchscreen Control Panel The Maverick Force s Profile has a touchscreen display and six control buttons. Navigate the menu structure by pressing the buttons, touching the images of the buttons on the sides of the display, or touching the desired menu option on the display directly. The touchscreen can be locked and calibrated through the Setup options in the menu (see Touchscreen Calibration and Touchscreen Lock).
Operation Menu Map Refer to the Maverick Force s Profile product page on www.chauvetprofessional.com for the latest menu map. Main Level Programming Levels Description Address 001–480 Sets the starting address Manual Manually set IP address IP Mode DHCP Network sets IP address Static Product sets IP address 000–255 (Art-Net™) Network Universe Sets the universe 001–256 (sACN) Setup Sets the IP address in Ip 002._ _ _._ _ _._ _ _ Manual mode Sets the Subnet Mask in SubMask _ _ _._ _ _._ _ _.
Operation Main Level Programming Levels Lock Screen Swap XY Description NO YES NO YES 30S Backlight Timer 1M 5M Loss of Data ON Hold Close Auto Full ECO Fans TV35 Settings (cont.) Dimmer Curve PWM Option LED Power Min. Zoom Focus Preset Select Preset Sync USB Update Page 10 of 31 TV25 Linear Square I Squa SCurve Linear2 600Hz 1200Hz 4000Hz 6000Hz 15000Hz 64–255 NO YES PRESET A PRESET B PRESET C NO YES NO YES Lock the buttons and touch screen.
Operation Main Level Settings (cont.
Operation Main Level Test (cont.) Manual Test (cont.
Operation Main Level Information (cont.) Channel Information (cont.) Programming Levels Blade 1-1 Blade 1-1 Fine Blade 1-2 Blade 1-2 Fine Blade 2-1 Blade 2-1 Fine Blade 2-2 Blade 2-2 Fine Blade 3-1 Blade 3-1 Fine Blade 3-2 Blade 3-2 Fine Blade 4-1 Blade 4-1 Fine Blade 4-2 Blade 4-2 Fine Blade Rotate Blade Rotate Fine Focus Focus Fine Focus Auto Zoom Zoom Fine Prism Prism Rotate Iris Frost CMY Macro CMY Macro Speed Special Function Maverick Force s Profile User Manual Rev.
Operation Control Channel Assignments and Values Dmx Mode 47 CH Channel Function 1 Pan 2 Pan fine 3 Tilt 4 Fine tilt 5 Pan/tilt speed 6 Dimmer 7 Dimmer fine 8 9 10 11 12 13 14 Value 000 255 000 255 000 255 000 255 000 255 000 255 000 255 000 003 004 007 008 076 Strobe 077 145 146 215 216 255 000 001 Virtual strobe 002 128 129 255 Cyan 000 255 Magenta 000 255 Yellow 000 255 000 006 007 013 014 020 021 027 028 034 035 041 Color wheel (see Color Wheel) 042
Operation Channel Function 15 Gobo 1 rotation 16 Fine gobo 1 rotation 17 Gobo wheel 2 (static) (see Gobo Designs) 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Blade 1-1 Blade 1-1 fine Blade 1-2 Blade 1-2 fine Blade 2-1 Blade 2-1 fine Blade 2-2 Blade 2-2 fine Blade 3-1 Blade 3-1 fine Blade 3-2 Blade 3-2 fine Blade 4-1 Blade 4-1 fine Blade 4-2 Blade 4-2 fine Frame rotation Frame fine rotation Focus Focus fine Value 000 063 064 145 146 149 150 231 232 255 000 255 000 005 0
Operation Channel Function 38 Auto focus 39 40 Zoom Fine zoom 41 Prism 42 Prism rotation 43 Iris 44 Frost 45 CMY macro 46 CMY macro speed Page 16 of 31 Value 000 010 011 030 031 050 051 070 071 090 091 110 111 130 131 150 151 170 171 190 191 210 211 255 000 255 000 255 000 004 005 255 000 127 128 189 190 193 194 255 000 063 064 127 128 191 192 255 000 255 000 009 010 020 015 255 021 255 000 255 Percent/Setting No function 0–5 m a
Operation Channel Function 47 Control Value 000 007 008 015 016 023 024 031 032 039 040 047 048 055 056 095 096 103 104 111 112 119 120 127 128 131 132 135 136 143 144 151 152 159 160 167 168 175 176 183 184 191 192 199 200 207 208 215 216 217 218 220 221 225 226 230 231 235 236 240 241 245 Maverick Force s Profile User Manual Rev.
Operation Dmx Mode 31 CH Channel Function 1 Pan 2 Pan fine 3 Tilt 4 Fine tilt 5 Pan/tilt speed 6 Dimmer 7 8 9 10 11 12 13 Value 000 255 000 255 000 255 000 255 000 255 000 255 000 003 004 007 008 076 Strobe 077 145 146 215 216 255 000 001 Virtual strobe 002 128 129 255 Cyan 000 255 Magenta 000 255 Yellow 000 255 000 006 007 013 014 020 021 027 028 034 035 041 Color wheel (see Color Wheel) 042 048 049 059 060 187 188 219 220 223 224 255 000 0
Operation Channel Function 14 Gobo 1 rotation 15 Gobo wheel 2 (static) (see Gobo Designs) 16 17 18 19 20 21 22 23 24 25 26 Blade 1-1 Blade 1-2 Blade 2-1 Blade 2-2 Blade 3-1 Blade 3-2 Blade 4-1 Blade 4-2 Frame rotation Focus Zoom 27 Prism 28 Prism rotation 29 Iris 30 Frost Value 000 063 064 145 146 149 150 231 232 255 000 005 006 011 012 017 018 023 024 029 030 035 036 041 042 047 048 053 054 063 064 069 070 075 076 081 082 087 088 093 094 099 100 10
Operation Channel Function 31 Control Value 000 007 008 015 016 023 024 031 032 039 040 047 048 055 056 095 096 103 104 111 112 119 120 127 128 131 132 135 136 143 144 151 152 159 160 167 168 175 176 183 184 191 192 199 200 207 208 215 216 217 218 220 221 225 226 230 231 235 236 240 241 245 Percent/Setting No function Pan tilt blackout Color blackout Gobo blackout Pan tilt/color blackout Pan tilt/gobo blackout Pan tilt/color/gobo blackout No
Operation Gobo Designs Gobo Wheel 1 Gobo Wheel 2 Rotating gobo wheel 1 Static gobo wheel 1 7 2 6 3 5 4 2 8 3 7 4 Gobo Wheel Gobo # 1 1 2 3 4 5 6 7 Description 5 Gobo Wheel Gobo # 2 1 2 3 4 5 6 7 8 9 Sail boats Radial dot Bar Bolts Shower glass Ballistic clouds Four eyes Rotating Gobo Dimensions 9 6 Description Beam Bars Circles Breakup Dots Circuits Triangles Forest Rainbows 25.5 mm 17 mm IMAGE Maverick Force s Profile User Manual Rev.
Operation Configuration (DMX, WMDX, Art-Net™, sACN) Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller. Control Mode The Maverick Force s Profile works with wired DMX, WDMX, Art-Net™, and sACN control signals. To select which protocol to use: 1. Go to the Settings main level. 2. Select the Control Mode option. 3. Select the desired protocol, from DMX, WDMX, ArtNet, or sACN. See the Network Setup section for further setup of Ethernet protocols (Art-Net™ or sACN).
Operation Configuration (Settings) Pan Reverse To set the orientation of the pan: 1. Go to the Settings main level. 2. Select the Pan Reverse option. 3. Select from NO (normal pan motion) or YES (reversed pan motion). Tilt Reverse To set the orientation of the tilt: 1. Go to the Settings main level. 2. Select the Tilt Reverse option. 3. Select from NO (normal tilt motion) or YES (reversed tilt motion). Screen Reverse To set the orientation of the display: 1. Go to the Settings main level. 2.
Operation Loss of Data To set how the product reacts to a loss in control signal data: 1. Go to the Settings main level. 2. Select the Loss of Data option. 3. Select from Hold (holds the last values received before signal loss) or Close (blacks out the product). Fan Mode To set the fan speed mode: 1. Go to the Settings main level. 2. Select the Fans option. 3.
Operation USB Update To enable or disable software update using USB: 1. Go to the Settings main level. 2. Select the USB Update option. 3. Select NO (disables software update through USB) or YES (enables software update through USB). See the USB Software Update section for the detailed instructions on how to update the Maverick Force s Profile software using the USB flash drive. Reset Function To reset specific functions or the entire product: 1. Go to the Settings main level. 2.
Operation Web Server The Maverick Force s Profile Web Server can be accessed by any computer on the same network as the product. It allows network access to system information and settings, such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password. 1. Connect the product to power. 2. Set the Control Mode to ArtNet and the IP Mode to Static. 3. Connect the product to a Windows computer with a network cable. 4.
Operation Gobo Replacement The gobos in gobo wheel 1 are removable from their gobo holders. This operation is quite simple, although it requires the technician to carefully follow the recommended procedure. • Make sure to disconnect the product’s power cord before replacing a gobo. • Always replace a gobo with a gobo of the same dimensions. • When inserting a glass gobo, always make sure that the shiny side of the gobo (glass base) faces the lamp.
Maintenance 5. Maintenance Product Maintenance Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below: 1.
Technical Specifications 6. Technical Specifications Dimensions and Weight Length 14.2 in (360 mm) Width 9.2 in (234 mm) Height 25.1 in (636 mm) Weight 52.9 lb (24 kg) Note: Dimensions in inches are rounded. Power Power Supply Type Range Switching (internal) 100 to 240 VAC, 50/60 Hz Parameter 100 V, 60 Hz Consumption 580 W Operating current 5.82 A Fuse/breaker F 10 A, 250 V 13.
Returns Returns Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags. Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. To submit a service request online, go to www.chauvetprofessional.com/service-request. Clearly label the package with an RMA number.
Contact Us Contact Us General Information Technical Support Chauvet World Headquarters Address: 5200 NW 108th Ave. Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll Free: (800) 762-1084 Voice: (844) 393-7575 Fax: (954) 756-8015 Email: chauvetcs@chauvetlighting.com Website: www.chauvetprofessional.com Chauvet Europe Ltd Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0) 1773 511115 Fax: +44 (0) 1773 511110 Email: UKtech@chauvetlighting.
