User Manual
TABLE OF CONTENTS 1. Before You Begin................................................................................3 What Is Included ........................................................................................... 3 Unpacking Instructions .................................................................................. 3 Claims ................................................................................................................... 3 Text Conventions ...............................
1. BEFORE YOU BEGIN What Is Included • • Intimidator™ Spot LED 150 Hanging Bracket with Mounting Hardware • • • Power Cord Warranty Card Quick Reference Guide Unpacking Instructions Immediately upon receipt, carefully unpack the product and check the container to make sure you have received all the parts indicated above in good condition.
Product at a Glance Use on Dimmer Outdoor Use Sound-Activated DMX Master/Slave Safety Notes Auto Programs Auto-ranging Power Supply Replaceable Fuse User-Serviceable Duty Cycle P P P x x Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance. • • • • • • • • • • • • • • • • • • • • Page 4 of 18 x x P P P This product is not intended for permanent installation.
2. INTRODUCTION Product Overview Adjustable Lens Moving Head Moving Yoke Cooling Fan LED Display Fuse Holder Power In/Out Intimidator™ Spot LED 150 User Manual Rev.
Product Dimensions Page 6 of 18 Intimidator™ Spot LED 150 User Manual Rev.
3. SETUP AC Power The Intimidator™ Spot LED 150 has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Mounting Before mounting the product, read and follow the Safety Notes. Orientation The Intimidator™ Spot LED 150 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging Mounting Diagram • Before deciding on a location, always make sure there is easy access to the product for maintenance and programming purposes. • Make sure that the structure or surface onto which you are mounting the product can support the product’s weight.
4. OPERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display.
Configuration (DMX) Set 1. 2. 3. the product in DMX mode to control with a DMX controller. Connect the product to a suitable power outlet. Turn the product on. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product. Starting Address When selecting a starting DMX address, always consider the number of DMX channels the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
DMX Channel Assignments and Values 11-CH Channel Function Value Setting 1 Pan 000 ó 255 0–540° 2 Tilt 000 ó 255 0–270° 3 4 5 Fine Pan Fine Tilt Speed 6 Color Wheel 000 ó 000 ó 000 ó 000 ó 006 ó 012 ó 018 ó 024 ó 030 ó 036 ó 042 ó 048 ó 054 ó 064 ó 070 ó 076 ó 082 ó 088 ó 094 ó 100 ó 106 ó 112 ó 118 ó 128 ó 255 255 255 005 011 017 023 029 035 041 047 053 063 069 075 081 087 093 099 105 111 117 127 191 192 ó 255 7 Shutter 8 Dimmer Intimidator™ Spot LED 150 User Manual Rev.
11-CH (cont.
6-CH Channel Function Value Setting 1 Pan 000 ó 255 0–540° 2 Tilt 000 ó 255 0–270° 3 Color 000 ó 006 ó 012 ó 018 ó 024 ó 030 ó 036 ó 042 ó 048 ó 054 ó 064 ó 070 ó 076 ó 082 ó 088 ó 094 ó 100 ó 106 ó 112 ó 118 ó 128 ó 005 011 017 023 029 035 041 047 053 063 069 075 081 087 093 099 105 111 117 127 191 000 ó 004 ó 008 ó 216 ó 000 ó 003 007 215 255 255 White Yellow Magenta Green Red Cyan Orange Blue Light Green Amber White + Yellow Yellow + Magenta Magenta + Green Green + Red Red + Cyan Cyan +
Configuration (Standalone) Set the product in one of the standalone modes to control without a DMX controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. Never connect a product that is operating in any standalone mode (either Static, Automatic, or Sound) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
Display Orientation You are able to flip the LED display for easy readability in any mounting situation. To select your display angle: 1. Press repeatedly until diS shows on the display. 2. 3. Master/Slave Mode Reset Software Press or to select normal display mode (diS) or inverse display mode (r diS). Press .
5. TECHNICAL INFORMATION Product Maintenance Dust build up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, you should clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
6. TECHNICAL SPECIFICATIONS Dimensions and Weight Length Width Height Weight 8.1 in (205 mm) 8.3 in (211 mm) 11.5 in (291 mm) 9.3 lbs (4.2 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Light Source Photo Optic Thermal DMX Ordering Power Supply Type Range Voltage Selection Switching (internal) 100~240 V, 50/60 Hz Auto-ranging Parameter 120 V, 60 Hz 230 V, 50 Hz Consumption 88 W 92 W Operating 0.7 A 0.
In case you need to return a product or request support, follow the procedure below: • • • If you live in the U.S., contact CHAUVET® World Headquarters (see below). If you live in the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your distributor of record. See www.chauvetlighting.com for distributors outside the U.S., United Kingdom, or Ireland. If you live outside the U.S.