User's Manual

Page 8 of 18 Intimidator™ Spot LED 150 User Manual Rev. 8
Mounting
Before mounting the product, read and follow the Safety Notes.
Orientation
The Intimidator™ Spot LED 150
may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming purposes.
• Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight. See the Technical Specifications
section of this
manual for weight information.
• When mounting the product overhead, always use a safety cable.
Mount the
product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13 mm holes, which are
appropriate
for this purpose.
• When power linking multiple products, you must always consider the length of the
power linking cable and mount the products close enough for the cable to reach.
• The rubber feet also serve as floor supports/allow for
surface mounting. When
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Mounting Diagram
Rubber Feet (x4)
Safety Loop
Attachment
Point
Bracket
Attachement (x2)