User manual

Obey™ D-Fi™ 2.4GHz User Manual (Rev. 1) Page 11 of 13
Blackout
Darkens all products. The <Blackout> button works in conjunction with the <Fade Time>
fader or alone.
To use fading blackout:
1. Select one or more products with the Product Selection (Fixture) buttons <1>
through <4>.
2. Adjust the <Fade Time> fader to the desired value to select how quickly the lights will
fade out.
3. Press <Blackout> until the LED indicator lights.
4. To cancel this mode for a single product (series), make sure <Blackout> is activated
and <Fade Time> is set to 0.1 m (the highest position). Then press <Blackout> until
the LED indicator is off.
To achieve instant blackout:
1. Double-tap <Blackout> to instantly blackout all products.
When in Blackout, the Obey™ D-Fi™ 2.4GHz’s other operating modes will not function.
Fading Blackout will not work when the controller is in Manual RGBW/RGBA mode.
Pressing Blackout will cause all selected products to blackout immediately.
Manual
RGBW/RGBA
Set this mode to use a manually selected custom color combination determined by the
positions of the Red, Green, Blue, and White faders.
1. Select one or more products with the Product Selection (Fixture) buttons <1>
through <4>.
2. Press <Manual RGBW> until the LED indicator lights.
3. Adjust the red, green, blue, and white/amber faders to the desired level.
When in Manual RGBW mode, pressing <Blackout> will immediately blackout the
products. Fading blackout operation does not function in Manual RGBW.
Speed/Fade Time functions do not operate in Manual RGBW mode.