User manual

Obey™ D-Fi™ 2.4GHz User Manual (Rev. 1) Page 9 of 13
RGB Fade
This mode will fade all connected products in unison as the colors change.
1. Select one or more products with the Product Selection (Fixture) buttons <1>
through <4>.
2. Press <RGB Fade> until the LED for the desired product lights.
3. Use the <Speed Time> fader to set the speed of color change cycle
4. Use the <Fade Time> fader to set the transition time between colors.
5. Use the <Master Dimmer> to set the desired intensity of the light.
Sound-Active mode will function in RGB Fade mode.
Auto
This mode uses built-
in programs to change each product independently among random
colors.
1. Select one or more products with the Product Selection (Fixture) buttons <1>
through <4>.
2. Press <AUTO> so the LED indicator lights up.
3. Use the <Speed Time> fader to set the speed of the program.
4. Use the <Master Dimmer> to set the desired intensity of the light.
5. Select one of the 9 <Preset Color> buttons.
Each product (1~4) will show a different, random color in this mode.
Sound-Active mode will function in Auto mode.
Chase
These preset chases provides several color combinations and cycle the LEDs on and off so
that the lights appear to move along a string.
1. Select one or more products with the Product Selection (Fixture) buttons <1>
through <4>.
2. Press the <Chases> button until the LED indicator lights.
3. Use the Preset Colors/Chases buttons to select a chase:
Color/Chase Button Chase Function
Red Red/Green
Orange Green/Blue
Yellow Red/Blue
Green Red/Cyan
Cyan Green/Magenta
Blue Yellow/Blue
Purple White/Blackout
Magenta Color Cycle
White Yellow/Magenta
4. Use the <Speed Time> fader to set the speed of chase.
5. Use the <Fade Time> fader to set the speed of the fade between colors.
6. Use the <Master Dimmer> to set the desired intensity of the light.
Sound-Active mode will function in Auto mode.