DMX-605A Intimidator™ 2.0 DMX-610A Insignia™ 2.0 USER MANUAL Insignia™ 2.0 Intimidator™ 2.0 Chauvet, 3000 N 29th Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 – (954) 929-1115 FAX (954) 929-5560 www.chauvetlighting.
TABLE OF CONTENT TABLE OF CONTENT ...................................................................................................................................................... 2 BEFORE YOU BEGIN ...................................................................................................................................................... 3 WHAT IS INCLUDED..........................................................................................................................................
BEFORE YOU BEGIN What is included 1 x DMX-610A Insignia™ 2.0 Intelligent Barrel Scanner or 1 x DMX-605A Intimidator™ 2.0 Intelligent Mirror Scanner Power cord with plug ELC 250w lamp Warranty Card Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
INTRODUCTION Features Insignia™ 2.0 Intimidator™ 2.0 Control Features Control Features 5 channel DMX Intelligent Barrel Scanner Strobing Gobo Wheel - 14 gobos plus open - 12 metal, 2 glass - Gobo Bounce™ Color Wheel - 11 colors plus open - (include UV purple) plus white Barrel Swivels 180° in .
Product Overview Barrel Scanner Mirror Scanner Hanging Yoke, double bracketed for floor positioning Lamp access cover Power & Fuse compartment Insignia™ 2.0 Microphone Intimidator™ 2.0 DMX connectors Voltage Switch Double bracketed yoke used for floor positions.
SETUP Lamp You will need to install a lamp prior to the initial operation of the fixture. An ELC 250W halogen lamp is included. Warning! When replacing the lamp, please wait 15 minutes after powering down to allow the unit to cool down! Always disconnect from main power prior to lamp replacement. Do not touch the envelope (glass area) of the bulb with bare hands. If this happens, clean the lamp with alcohol and wipe it with a lint free cloth before installation.
Setup Mounting O RI E NT AT IO N This fixture may be mounted in any position provided there is adequate room for ventilation. RIG G ING Hanging Clamp It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.
OPERATING INSTRUCTIONS Operating Modes A stand-alone mode will listen to sound and run through its diverse range of built in programs. Master/Slave mode will allow the command of up to as many units you want in a synchronized light show to the sound. DMX control mode will provide the greatest flexibility and creativity. Each fixture trait can be controlled individually using any universal DMX-512 controller.
Operating Instructions If this is your first time addressing a fixture using the DMX-512 control protocol than I suggest jumping to the Appendix Section and read the heading “DMX Primer”. It contains very useful information that will help you understand its use. Set the start address using the group of DIP switches located usually on bottom of the fixture. Each dip switch has an associated value. Adding the value of each switch in the ON position will provide the start address.
CA-9 Easy Controller (Optional) STAND BY MODE FUNCTION Pan & Tilt is sound activated but Gobo and Color wheel are static and controlled by the Function button. LED ON: Slow Mode Tap the Function button to step through the 11 colors then once more to step to the next gobo. The unit’s movement Pan & Tilt and Gobo/Color is sound activated. BLACKOUT Press and hold the Function button to achieve the following results. LED OFF: Fast Mode DMX-605A & DMX-610A User Manual . a.
APPENDIX DMX Primer There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX 512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required. Choosing a start address should be planned in advance.
Appendix DMX Channel Values Channel Value 1 000 015 016 091 092 135 136 195 196 255 Strobe Gobo Stopped Adjacent gobo strobe: Slow > Fast Adjacent color strobe: Slow > Fast Adjacent color and gobo strobe: Slow > Fast Gobo Bounce™: Slow > Fast 2 000 007 008 015 016 023 024 031 032 039 040 047 048 055 056 063 064 071 072 079 080 087 088 095 096 103 104 111 112 119 120 127 128 255 Gobo Blackout Open Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Gobo
Appendix Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month. Dust build up reduces light output performance and can cause overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off fixture before conducting maintenance. Unplug fixture from power.
Appendix General Troubleshooting Applies to Symptom Solution(s) Auto shut off Check fan thermal switch reset Beam is very dim or not bright Clean optical system or replace lamp Breaker/Fuse keeps blowing Check total load placed on device Chase is too slow Check users manual for speed adjustment Device has no power Lights Foggers & Snow Controllers Dimmers & Chaser Check 220/110v switch for proper setting Check for power on Mains. Check device’s fuse.
Appendix Technical Specifications WEIGHT & DIMENSIONS Length................................................................................................................. 457.20 mm (18.00 in) Width..................................................................................................................... 152.40 mm (6.00 in) Height ................................................................................................................... 139.70 mm (5.50 in) Weight........................