Instruction Manual

9
Average Mode
USB Mode
Online measurements, software controlled programs can run and take
measurements while the host computer is active. The host computer provides
power in this mode conserving battery life.
(Additional information is provided in the API section.)
Average Mode Memory Block 1 “n01”
Press and release the Power button
Memory Block 3 “n03”
Memory Block 30 “n30”
Memory Block 2 “n02”
Average values are calculated
based from the activation of
the power button. (Only
average values are available).
NOTE: In both Standard and Average Mode, the memory button is pressed to recall
memory. It can only give information on the last memory block stored. To examine
other memory blocks the data should be downloaded using the USB Mode and DT-
209X Software.