ILTT Operating Instructions ELECTROMATIC Equip’t Co., Inc 600 Oakland Ave. Cedarhurst, NY 11516 Tel: 800-645-4330 / 516-295-4300 Fax: 516-295-4399 Email: info@checkline.com Website: www.checkline.
CONTENTS 1 CONTENTS CONTENTS ................................................... 1 INTRODUCTION ............................................. 2 Description ......................................................... 2 System Specifications......................................... 2 OPERATION .................................................. 3 Display Operation ............................................... 3 Sample Mode ..................................................... 3 Program menu ................
INTRODUCTION 2 INTRODUCTION DESCRIPTION The AWS Inline QC Torque Tester is designed to provide for a wide range of torque testing applications in the smallest foot print at a very reasonable price. Features include an LCD graphics display, built-in battery pack for remote testing and serial output for use with a serial printer or Windows PC. (High capacity model shown here, available in capacities from 1000-5000 Foot Pounds.
OPERATION 3 OPERATION DISPLAY OPERATION Button Function: Powering on and off Press any Key to turn the unit on. Press CLR and ENT simultaneously to turn the unit off. ENT Sends the current reading to the serial port and clears the current peak. MDE Displays the current mode for 1 second. Pressing MDE again while the mode is displayed will change the mode. Any other button will return to sample mode. ENG Displays the current units for 1 second.
OPERATION 4 Buttons for menu navigation: Up (ENG): Go to the next item. Down (MDE): Go to the previous item. CLR: Exit back to sample mode and save all settings. ENT: Change the current item. Menu Items: (Some models may not have all menu items) A.C.: Autoclear time, in seconds. Off, 1 - 9 FILT: Peak filter frequency response, in hertz. 125, 250, 500, 750, 1500. PPER: Minimum peak, percentage of full scale. 2 - 50. S.L.: Sign lock. On, Off. LOW: Lower limit. A setting of 0.000 disables the limit.
OPERATION 5 CLR Cancels number edit mode and restores the previous number. SIDE PANEL INPUTS The side of the AWS-QC contains two interface connections: DC In The interface for the AC Adapter supplied with the unit. Use this if you plan on working under Mains power. Use only the AC adapter provided with the unit. Use of another power source will void the warranty and may cause severe damage to the display. RS-232 If you are downloading to a printer, data collector, computer, etc.
OPERATION 6 RS-232 The AWS-QC display can be connected to a printer, computer or data collector via its RS232 interface. Values are sent via RS-232 every time the unit autoclears or the ENT/clr button is pressed. Data cables can be made from the drawing below or purchased from AWS. We also offer various software packages to retrieve data from our units, including the QC. RS232 Transfer Protocol Protocol Value Cable 9 pin to mini- Baud 9600 plug.
DESCRIPTION OF FUNCTIONS The following is a description of the standard features of the AWS product line. OPERATING MODE Peak Displays and retains the maximum torque exerted by the wrench, as occurs when operating the wrench in the tightening direction. The Peak Mode is used for all power tools and some dial wrenches. 1st Peak Detects the “first peak” of torque experienced by the wrench, capturing the initial torque as occurs when the torque wrench cams over.
SERVICE AND WARRANTY SERVICE To ensure the best possible support for our customers, Advanced Witness Series maintains a complete calibration and repair facility for all its products. We keep in stock most replacement parts for torque testers, transducers, and our line of digital wrenches. When you buy a product from us, the only place you need to go for parts and service is...us! For service, call (408) 4535070, Monday through Friday, between the hours of 9:00am and 5:00pm Pacific Coast Time.
