User guide

4
SPECIFICATIONS:
Sensor Types -
Supply Voltage - 120VAC or 240VAC +/-10%, 50-60 Hz Dimensions h x w x d (in) - 3 x 2½ x 5
Ambient Temperature - 0 to 50°C, 32 to 130°F Fuse - 1A/250V, 5 x 20 mm, fast acting
TROUBLESHOOTING:
Warranty
Chemglass, Inc. warranties this unit against defects in material and workmanship for a period of two years from the date of sale. If
the unit should malfunction, it must be returned for evaluation. If the unit is determined to have a defect in materials or workman-
ship, then it will be repaired or replaced at no charge. Tampering with the unit or damage resulting from excessive current, heat,
moisture, vibration, corrosive materials, or misuse will void this warranty. Programming changes or reconfigurations are not cov-
ered under warranty.
To return this item under warranty, advise the Chemglass technical service department of the situation and they will provide you
with a return authorization number. The unit will be evaluated and repaired as required in accordance to the warranty.
Please contact the Chemglass technical service department with warranty repair information.
Chemglass technical service department:
Tel: [phone] ext. 2124
Fax: [phone]
Email: [e-mail]
TYPE RANGE °C RANGE °F COLOR ACCURACY °C
CG-3498-01 (T) -200 to 250 -273 to 482 Blue +/- 1
CG-3498-20 (K) -50 to 1200 -58 to 2192 Yellow +/- 1
Problem Possible Cause Corrective Action
“inPt” “FAiL” flashes Temperature sensor is unplugged, corroded, or broken Ensure Sensor is plugged in. Clean, or replace
No display when switch ON Blown fuse, no power from source Replace fuse. Check source circuit