User Manual

[3]
CLS-1455 Spinner Manual CG Life Sciences
Operating and Assembly Instructions:
The cap and magnet assemblies are shipped partially assembled.
WARNING: Be careful handling the glass shaft as accidental
breakage can cause injury
Figure 1
Glass Rod Installation (refer to Figure 1):
Remove the magnet from the magnet holder by pushing the magnet through the
holder until free. Next, remove the impeller blade by pulling it free of the magnet
holder. Insert the glass shaft into the hole in the bottom of the magnet holder.
Insert the silicone plug and then replace the impeller blade and re-install the
magnet.