Installation User guide

www.chenbro.com

ES34169 Chassis User’s Manual Rev. A1

2-port SATA-II Backplane

ES34169 is integrated with two SATA-II backplanes to support four 3.5” HDD with

hot-swap feature.

Hardware Specification:

Part Number 80H104534-001 Rev. A1

Host Interface SATA 7-pin compatible

HDD Interface SAS (22+7), SATA-II compatible

Hot-Swap Yes, allows user to on line replace Hard Disk Drive

Connectors

1. SATA-II x2 (to Host)

2. SAS (22+7) x2 (for HDD)

3. Standard 4P Power connector x 1 for +5V, +12V from

power supply

Dimension 232(L) x 27.4(W) x 1.6(T) mm

Backplane Connectors

(1) [CN11/CN21] : “22+7”pin SAS Connectors to HDD

(2) [CN22/CN12] : SATA Connectors to Host

(3) [CN1] : 4-pin Power Connector

(4) [CN3] : HDD Access LED Signal Pin Header

(5) [CN4] : HDD Failure LED Signal Pin Header

Connecting Pin 1 & 2 to the CATHODE of the HDD failure connector on RAID

card. Refer to the RAID card’s user manual for the detail pin definition.

CN4

CN22

CN1

CN11 (HDD 1)

CN12

CN21 (HDD 2)

CN3

HDD