User guide

4-Port 6Gb/s Mini-SAS Backplane 80H10321516A1
User’s Manual
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: [phone] Fax: [phone] Email: [e-mail]
9
www.chenbro.com
(A) Example of assembly procedure for RM31212B chassis
1. Get the complete 3U backplane assembly set (with three backplanes) ready and make sure the
backplane guide rail is installed before backplane assembly.
2. Make sure the backplane ID is configured properly from bottom to top with starting from #1 to #3.
3. Slide the backplane assembly set into the chassis.
4. Fix the backplane assembly set with screws on both sides of chassis.
5. Connect the LED board signal cable for each backplane and LED board.
6. Refer to “Backplane wiring” session for cable connection.
Backplane ID #3
Backplane ID #2
Backplane ID #1
1
2
3
4
5
Fix Screws
4