Datasheet

22
Straight (120°C Rated)
Plastic Straight (85°C Rated)
Roller
Plastic RollerPlastic Simulated Roller
Operating Point
Rest Position
»L« ±0.03
(±0.8)
»L« ±0.03
(±0.8)
R 0.10
(2.5)
R 2
ø5
ø0.19
(ø4.8)
0.14
(3.5)
0.14
(3.5)
»L« ±0.03
(±0.8)
»L« ±0.03
(±0.8)
0.14
(3.5)
0.14
(3.5)
»L« ±0.03
(±0.8)
»L« ±0.03
(±0.8)
0.11
(2.9)
≥0.22
(≥5.6)
≥0.22
(≥5.5)
0.14
(3.3)
Auxiliary Actuators inches (mm)
Specifications subject to change without notice.
Actuator Specifications
Maximum Maximum Operating Max. Movement
Operating Force Pre-Travel Point Differential
(cN) inches (mm) inches (mm) Minimum inches (mm) Max. Rest Actuation
Over-Travel Position Length
Actuator Switch
DC1, DC1, DC1,
inches
DC1,
inches inches
Code Type DC3, DC4 DC2 DC3, DC4 DC2 DC3, DC4 DC2 (mm) DC3, DC4 DC2 (mm) (mm)
AA 200 340 0.04 0.04 0.33±0.01 0.33±0.01 0.02 0.004 0.004 0.37 —
(1.0) (1.0) (8.4±0.3) (8.4±0.3) (0.6) (0.10) (0.10) (9.3) —
LB 80 150 0.18 0.20 0.42±0.05 0.42±0.06 0.06 0.02 0.03 0.55 0.189
(4.5) (5.0) (10.7±1.3) (10.7±1.6) (1.5) (0.5) (0.7) (14.0) (4.8)
LC 70 120 0.20 0.22 0.44±0.06 0.44±0.07 0.06 0.02 0.04 0.59 0.276
(5.0) (5.5) (11.1±1.5) (11.1±1.8) (1.5) (0.6) (1.0) (15.0) (7.0)
LD
forces and travel available upon request
1.654
(42.0)
SB 90 160 0.18 0.20 0.63±0.05 0.63±0.06 0.06 0.02 0.03 0.75 0.098
(4.5) (5.0) (16.0±1.3) (16.0±1.6) (1.5) (0.5) (0.7) (19.0) (2.5)
SC 80 130 0.20 0.22 0.65±0.06 0.65±0.07 0.06 0.02 0.04 0.79 0.185
(5.0) (5.5) (16.4±1.5) (16.4±1.8) (1.5) (0.6) (1.0) (20.0) (4.7)
SD
forces and travel available upon request
1.563
(39.7)
RB 90 160 0.18 0.20 0.62±0.05 0.62±0.06 0.06 0.02 0.03 0.75 0.098
(4.5) (5.0) (15.8±1.3) (15.8±1.6) (1.5) (0.5) (0.7) (19.0) (2.5)
RC 80 130 0.20 0.22 0.64±0.06 0.64±0.07 0.06 0.02 0.04 0.79 0.185
(5.0) (5.5) (16.2±1.5) (16.2±1.8) (1.5) (0.6) (1.0) (20.0) (4.7)
RD
forces and travel available upon request
1.563
(39.7)
WB 68 115 0.18 0.18 0.44±0.06 0.44±0.06 0.08 0.02 0.02 0.59 0.276
(4.5) (4.5) (11.1±1.5) (11.1±1.5) (2.0) (0.6) (0.6) (15.0) (7.0)
WC 50 85 0.24 0.24 0.48±0.07 0.48±0.07 0.12 0.03 0.03 0.67 0.551
(6.0) (6.0) (12.2±1.8) (12.2±1.8) (3.0) (0.8) (0.8) (17.0) (14.0)
VB 73 125 0.18 0.18 0.47±0.06 0.47±0.06 0.08 0.02 0.02 0.59 0.220
(4.5) (4.5) (11.9±1.4) (11.9±1.4) (2.0) (0.6) (0.6) (15.0) (5.6)
ZB 73 125 .018 0.18 0.63±0.06 0.63±0.06 0.06 0.02 0.02 0.75 0.205
(4.5) (4.5) (16.0±1.4) (16.0±1.4) (1.5) (0.6) (0.6) (19.0) (5.2)