Owner`s manual

Here’s the second :
0 Move the Cruise switch from ON to WA (R&sur%e/Accelerate). Hold it
there until you get
up to the speed you want, and then release the
switch.
To increase your speed in very small amounts, move the switch to WA
(Resume/Accelerate). Each time you do this, your vehicle will go about
1 mph ( I .6 km/h) faster.
To Reduce Speed While Using Cruise Control
Push in the
button at the end
of the lever until
you reach the
lower speed you
want, then release
it.
To slow down in very small amounts, push the button for less than half
a second. Each time you do this, you’ll go 1 mph (1.6 krdh) slower.
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed, When you take your foot
off the pedal, your vehicle will slow down to the Cruise Control speed you
set earlier.
2-47