Owner`s manual
The trip odometer can
tell
you how far your vehicle has been driven since
you last set the trip odometer to zero.
Make
sure the button
is
completely
depressed
to
reset the trip odometer.
To
set the trip odometer
on
the standard cluster to zero,
fully
depress
the
button near the readout.
The trip odometer on
the
digital cluster
will
appear
in
place
of
your
regular
odometer when
you
press down on the
Trip
button. To reset
the
trip
odometer
on
the
digital cluster, press down
on
the
Reset
button.
To
change
back
to
the regular odometer, press down
on
the
Trip
button again.
Tachometer
The tachometer
displays the engine
speed
in
revolutions
per minute (rpm). It is
available
only
with the
digital speedometer.
NOTICE:
Do
not operate the engine with the tachometer in the red area,
or engine damage may occur.
Warning Lights, Gages and Indicators
This section describes the warning lights and gages that may be on your
vehicle. The pictures
will
help you locate them.
Warning lights and gages can signal that something is wrong before it
becomes serious enough
to
cause an expensive repair or replacement.
Paying attention
to
your warning lights and gages could also save
you
or
others from injury.
Warning lights
go
on
when there may be or
is
a problem with one
of
your
vehicle’s functions.
As
you
will see
in
the details on the
next
few pages,
some warning lights come
on
briefly when you turn
the
ignition key just to
let
you
know
they’re
working. If
you
are familiar
with
this section,
you
should not be alarmed when this happens.
7-67