User Guide

Setting Cruise Control
Resuming
a Set Speed
Suppose you set your cruise control at a desired speed
and
then you apply the brake. This, of course, shuts off
the cruise control. But you don't need to reset it.
1 A CAUTION:
If you leave your cruise control switch on when
you're not using cruise, you might hit a button
and go into cruise when
you don't want to. You
could be startled and even lose control. Keep
the cruise control switch
OFF until you want to
use it.
1. Move the cruise control switch to ON.
2. Get up to the speed you want.
3. Press in the SET button
at the end of the lever
and release it.
Once you're going about
25 mph (40 kmh) or more,
you can
move the cruise
control switch from
ON
to WA for about a half
I a second.
You'll
go right back up to your chosen speed and
stay there.
Remember, if you hold the switch at
R/A longer than a
half a second, the vehicle will keep going faster until
you release the switch or apply the brake. You could be
startled and even lose control.
So unless you want to go
faster, don't hold the switch at WA.
2-43