User Guide

When your vehicle is being towed, have the ignition
key
turned
to
the
OFF
position. The steering wheel should
be clamped in
a
straight-ahead position with a clamping
device designed for towing service.
Do
not
use the
vehicle's steering column lock for this. The transmission
should be in NEUTRAL
(N)
and the transfer case,
if
you
have one, should be in
2HI.
The parking brake should
be released.
If
your vehicie has a floor mounted shifter and
no
electrical power, the electrical solenoid lock must be
overridden
to
shift from PARK
(P)
to
NEUTRAL
(N).
Follow
these steps:
1.
Push the base
of
the
shift lever boot forward with
your thumb.
2.
Lift the boot and find the white solenoid lever.
1-
3.
4.
5.
Move the solenoid lever toward the driver's side
to
unlock
it.
While holding
the
solenoid lever in the unlock
position, press the shift lever button and shift into
NEUTRAL
(N).
Release the solenoid lever and snap the boot back
into
place.
Don't have your vehicle towed on the drive wheels
unless you must.
If
the vehicle must be towed
on
the
drive wheels, be sure
to
follow the speed and distance
restrictions later in this section or your transmission will
be damaged.
If
these
limitations must be exceeded, then
the drive wheels have to
be
supported on
a
dolly.
5-9