User Guide

Follow this diagram to store the underbody-mounted spare.
Y;
BJ
A.
Retainer
B.
Valve Stem
(Pointed Down)
C.
Spare
or
Flat Tire
D.
Spring
E.
Wheel Wrench
E
Lower
G.
Raise
H.
Hoist Arm
1.
Put the tire on the ground at the rear
of
the vehicle,
with
the valve stem pointed down and to
the
rear.
2.
Pull the retainer through the wheel.
3.
Put the chisel end
of
the
wheel wrench, on an angle,
through the hole
in
the rear bumper and into the hoist
shaft. Turn the wheel wrench clockwise
until
the tire
is
raised against the underside
of
the vehicle.
You
will
hear two “clicks“ when the tire
is
secure,
but
pull on the tire
to
make sure.
5-33