User Guide
Front
Reading
Lamps
1.
Use a coin or small screwdriver
to
unscrew
the
center
of
the overhead console lamp lens while
pressing in
on
the lamp assembly.
2.
Remove the lamp assembly from the console.
3.
Remove the bulb assembly from
the
lamp assembly.
4.
Pull the bulb straight out of the base.
5.
Put a new bulb into the bulb base.
6.
Install
the bulb assembly into the lamp assembly.
7.
Place the lamp assembly into the console, turning
it
to
latch
it
in
place.
8.
Install the lens.
Vanity
Mirror
Lamps
1.
Insert the blade
of
a
small
screwdriver into
the
center
slot
at
the bottom
of
the lens.
2.
Gently pry the screwdriver down
in
order to
lift
out
the lens.
3. Pry out the bulb.
4.
Press the new bulb
into
place.
5.
Slide the side tabs
of
the lens under the side
of
the
vanity assembly frame.
6. Rotate the lens downward.
7.
Snap
the lens into the frame.
Windshield Wiper Blade Replacement
See "Normal Maintenance Replacement
Parts"
in
the
Index for the proper type
of
replacement blade.
I
1
NOTICE:
Use care when removing or installing
a
blade
assembly. Accidental bumping can cause the arm
to fall back and strike the windshield.
1.
To
remove the old wiper blades.
lift
the wiper arm
until
it
locks
into
a vertical position.
6-38