User's Manual

ManualsBrandsChic Technology ManualsComputers & AccessoriesWIRELESS KEYBOARD

Table Of Contents

Wireless Mouse Patents

- Wireless Mouse and Stand Body: Taiwan 078386, China 01360042.7, Germany 401 06 575.8, and

USA Pending

- Improved Structure of Wireless Mouse System: Taiwan 89222812, China 01100419.3, Germany 201

12 178.6 and USA Pending

- Wireless Mouse Recharge System: Taiwan 90104125, China 01109443.5, Germany 20112177.8, USA

Pending

- Multiple Recharge System: Taiwan 90115187, China 01120050.2, Germany 20201110.0, USA

Pending

PMU-CKM00108 / Made in China

LED Indicator

(Specially designed for low-battery notice.)

Mouse Charge Mode (Option)

Note:

- Please skip this section if your mouse is not rechargeable.

- Please use rechargeable batteries for the chargeable mouse.

- At the first time of usage, please charge the AA batteries at least 10 to 12 hours or 6 to 8 hours for the

AAA batteries.

% Charge from the Cradle: The receiver cradle must be connected with the required AC-to-DC adapter in

advance and then place the mouse on the cradle precisely.

% Charge through the USB-to-DC Cable: Connect the cable with the mouse and then plug the USB

connector of the cable to the PC.

% Charge through the AC-to-DC Adapter: Connect the adapter's DC jack to the mouse for charging.

Notification

% This equipment is intended for use in the following countries.

18 European Countries:

Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,

Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

% For Wireless Optical Mouse: The optical technology can precisely detect the mouse motion on most

surfaces. Please avoid using the optical mouse on any reflective, transparent, metallic or complex-

pattern surface.

% Recommendation: please do not use the mouse during charge periods.

% The low-battery indicator or the scroll wheel on the mouse will light while the mouse is low battery.

Please recharge or change the batteries immediately.

% Press any button to wake up the keyboard or the mouse while they are in the sleeping mode.

% The low-battery LED indicator will light while the keyboard is in the status of low battery and a low-

battery icon will appear on the taskbar of Windows. Please change the batteries immediately.

% If the product is malfunction, please change or recharge the batteries, or move the receiver away from

the computer and the monitor at least 20 cm.

% If the keyboard or the mouse does not work properly, please make sure the PS/2 or the USB port of the

computer is valid. Besides, check the connecter or the cable of the receiver if there is broken or tangled.

% Please avoid using the keyboard and the mouse under direct sunlight, extreme hot, cold or dusty

Play or Pause media. Once paused, press this key again to resume

playing.

Stop playing media.

Increase the volume. Hold down to increase the volume more

quickly.

Play/Pause

Stop

Volume up

Decrease the volume. Hold down to decrease the volume more

quickly.

Turn off the sound. Press again to turn the sound back on.

Switch to the next media track. Press once for each subsequent track.

Switch to the previous media track. Press once for each preceding

track.

Volume down

Next Track

Mute

Pre Track

Multimedia Wireless Keyboard Combo

with Wireless Optical Mouse or Wireless Mouse

User's Quick Guide

Federal Communications Commission (FCC) requirements, Part 15

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CE Declaration Of Conformity

Hereby, the manufacturer, declares that this Office Wireless Keyboard Combo with Wireless Mouse is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Essential requirements - Article 3 Protection requirements for health and safety - Article 3.1a --Testing for electric safety according to EN 60950

has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility -Article 3.1b --Testing

for electromagnetic compatibility according to EN 301 489-1, EN 301 489-17 and EN 55024 has been conducted. These are considered relevant

and sufficient. Effective use of the radio spectrum -Article 3.2

--Testing for radio test suites according to EN 300 328-2 has been conducted. These are considered relevant and sufficient.

Congratulations on your purchase of the Multimedia Wireless Keyboard Combo

featured with the unique Smart Link function. Please carefully read the User's

Quick Guide to learn about the installation and the powerful functions of your new

Multimedia Wireless Keyboard and Mouse.

Contents of Package

4 Multimedia Wireless Keyboard

4 Wireless Optical Mouse or Wireless Mouse

4 Receiver

4 Keyboard Battery: AA * 2

4 Mouse Battery: AA * 2 or AAA * 3

4 AC to DC Adapter (Option)

4 USB-to-DC Cable (Option)

4 USB-to-PS/2 Adapter (Option)

4 Driver CD-ROM

4 User's Quick Guide

Install Hardware

Note:

- Please select the instruction section for the connector type of the keyboard and the mouse.

- The locations of the channel switch and the link button may be different due to various keyboard and

mouse shapes.

- Some models may be designed as one-channel version, which will not have a channel switch, please

skip the channel-setting step.

Summary of content (2 pages)

PAGE 1
Play/Pause Play or Pause media. Once paused, press this key again to resume playing. Stop Stop playing media. Volume up Increase the volume. Hold down to increase the volume more quickly. Volume down Decrease the volume. Hold down to decrease the volume more quickly. Mute Turn off the sound. Press again to turn the sound back on. Pre Track Switch to the previous media track. Press once for each preceding track. Next Track Switch to the next media track. Press once for each subsequent track.
PAGE 2
- If you are running Windows 98 and plug the connector into the computer, you may find a pop-up window that requires to insert the Windows 98 CD-ROM. Please follow the window instruction to install the required driver or set the driver path as "Windows\system" or the other path that the driver located. % Install the Receiver with PS/2 Connectors 1) Please turn off your PC. 2) Plug the mouse PS/2 connector on the receiver into the PS/2 mouse port of the PC.