Use And Care Manual

17
5. Place ambiance burner “ON/OFF” switch in
“OFF” position.
6. Set main gas supply cock in “ON” position.
7. Turn main electrical supply “ON.”
8. Place main “ON/OFF” switch in “ON” position.
9. If burner does not light, repeat steps 1-8.
VII. Ambient Burner Lighting
Instructions
Note: The hearth burner system must be ON as controlled by the
thermostat.
Place ambient burner ON/OFF switch in “ON” position.
VIII. Shutting Down Instructions
To shut down the burner control systems for a period
of time, turn “OFF” the main electrical supply and place
the main panel ON/OFF switch and ambiance burner
circuit ON/OFF switch to the “OFF” position.
To shut down the burner control systems for longer than
a week, turn “OFF” and “LOCK OUT” the main electrical
supply to the burner systems and turn “OFF” and “LOCK
OUT” the incoming gas supply gas cock.
Gas/Electric Installation Continued