Specifications

2015/03 – Subject to change
17
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features – Pneumatic components
Vertical stacking
Additional functions can be added to
each valve position between the
sub-base and the valve.
These functions are known as vertical
stacking modules and enable special
functioning or control of an individual
valve position.
Pressure regulator plate
An adjustable pressure regulator can
be installed between the sub-base
and the valve in order to control the
force of the triggered actuator.
This pressure regulator maintains an
essentially constant output pressure
(secondary side) independent of
pressure fluctuations (primary side)
and air consumption.
Standard version:
 For supply pressure up to 6 bar or
up to 10 bar
 Without pressure gauge (optional,
rotatable)
 Adjusted using a screwdriver or
regulator knob
Vertical pressure shut-off plate for width 10 mm
The vertical pressure shut-off plate
can be used to hot swap individual
valves without switching off the
overall air supply.
The working pressure for the
individual valve can be switched off
manually via the vertical pressure
shut-off plate using the actuating
element.
Vertical pressure supply plate for width of 20 mm
This vertical pressure supply plate
enables an individual valve to be
supplied with individual operating
pressure independently of the operat
ing pressure of the valve terminal.
The exhaust and pilot air supply of the
valve are still provided via the central
connections of the valve terminal.