Specifications

Subject to change – 2015/03
18
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features – Pneumatic components
Pressure regulator
Circuit symbol Code Description
Pressure regulator 1-32: PA
Pressure regulator 1-32: PF
Regulates the pressure upstream
of the valve in duct 1
Same regulated pressure at duct 2
and duct 4
Venting in the valve from duct 2 to
duct 3 and from duct 4 to duct 5
Regulator not affected by venting
Regulator can always be adjusted
Available in width 10 mm and
20 mm
Pressure regulator 1-32: PC
Pressure regulator 1-32: PH
Regulates the pressure for duct 2
downstream of the valve
Venting via the regulator from
duct 2 to duct 3
Exhaust flow rate is restricted by
the regulator
Regulator can only be adjusted in
switched state
Available in width 10 mm and
20 mm
Pressure regulator 1-32: PB
Pressure regulator 1-32: PG
Regulates the pressure for duct 4
downstream of the valve
Venting via the regulator from
duct 4 to duct 5
Exhaust flow rate is restricted by
the regulator
Regulator can only be adjusted in
switched state
Available in width 10 mm and
20 mm
Pressure regulator 1-32: PN
Pressure regulator 1-32: PL
Splits the supply air in duct 1 and
regulates the pressure upstream of
the valve in duct 3
Valve is operated in reverse mode
Venting in the valve from duct 2 to
duct 1
Regulator not affected by venting
Regulator can always be adjusted
Available in width 20 mm
Pressure regulator 1-32: PK
Pressure regulator 1-32: PM
Splits the supply air in duct 1 and
regulates the pressure upstream of
the valve in duct 5
Valve is operated in reverse mode
Venting in the valve from duct 4 to
duct 1
Regulator not affected by venting
Regulator can always be adjusted
Available in width 20 mm
Vertical pressure shut-off plate
Circuit symbol Code Description
Pressure regulator 1-32: PS Allows the pressure in duct 1 and
duct 12/14 to be switched off
upstream of the valve
Venting in the valve from duct 2 to
duct 3 and from duct 4 to duct 5
Vertical pressure shut-off plate not
affected by venting
Operating pressure 3 … 8 bar
Available in width 10 mm