Specifications

2015/03 – Subject to change
21
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features – Pneumatic components
Supply module
Illustration Code Type Designation Notes
Exhaust port:
UD, UE, UF, UM, UN, UP or UG
VMPAL-EG Exhaust plate for ducted
exhaust air
Additional supply modules can be used
for larger terminals or to create
additional pressure zones.
Supply modules can be configured at
any point upstream or downstream of
the sub-bases.
Supply modules contain the following
ports:
 Compressed air supply (duct 1)
 Exhaust air (duct 3/5)
Depending on your order, the exhaust
ducts are either ducted or vented via
the flat plate silencer.
Exhaust port: – VMPAL-EU Flat plate silencer
Type of module block 1-40: U VMPAL-SP-0 Supply module with elec
trical interlinking module
Ports for supply and venting
Code Port QS push-in fitting/cartridge fitting
Right-hand end plate with supply ports 1, 3, 5
Right-hand end
plate: D
1 Air/vacuum supply Thread G¼ QS-G¼, straight,
for tubing O.D.  8 mm, 10 mm, 12 mm, Ć, y†,
½†
3 Exhaust air Thread G¼
5 Exhaust air Thread G¼
12/14 Pilot air supply Thread M7 QSM-M7, straight or angled,
for tubing O.D.  4 mm, 6 mm, ¼†
82/84 Pilot exhaust air Thread M7
Supply module
Type of module
block 1-40: U
1 Air/vacuum supply Cartridge fitting QSPKG20, straight,
for tubing O.D.  8 mm, 10 mm, 12 mm, Ć, y†,
½†, adapter for thread G¼
3/5 Exhaust air Flat plate silencer –
Cartridge fitting QSPKG20, straight,
for tubing O.D.  8 mm, 10 mm, 12 mm, Ć, y†,
½†, adapter for thread G¼
12/14 Pilot air supply – –
82/84 Pilot exhaust air – –
Right-hand end plate without supply ports
Right-hand end
plate: –
1 Air/vacuum supply – –
3 Exhaust air – –
5 Exhaust air – –
12/14 Pilot air supply Thread M7 QSM-M7, straight or angled,
for tubing O.D.  4 mm, 6 mm, ¼†
82/84 Pilot exhaust air Thread M7