Specifications

Subject to change – 2015/03
22
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features – Pneumatic components
Creating pressure zones and separating exhaust air
MPA-L offers a number of options
for creating pressure zones if differ
ent working pressures are required.
Up to nine pressure zones in total
are possible.
Pressure zones are created by isol
ating the internal supply ducts in a
special sub-base. Each pressure
zone must have its own compressed
air supply.
Compressed air can be supplied
and vented via a supply module
and/or the right-hand end plate.
The position of the supply modules
and the sub-bases with pressure
zone separation can be freely
chosen with the valve terminal
MPA-L.
The sub-bases with pressure zone
separation are integrated in the ter
minal ex-works as per your order.
They can be distinguished by their
coding, even when the valve ter
minal is assembled. Duct separa
tion always takes place to the right
of the sub-base.
Creating pressure zones
Sub-bases with pressure zone separation Code Notes
Illustrated examples Coding
Duct separation to the
right of sub-base 1 - 40: –
 No duct separation
Duct separation to the
right of sub-base 1 - 40: T
 Duct 1 separated
 VMPAL-…-T1
Duct separation to the
right of sub-base 1 - 40:
TR
 Duct 3/5 separated
 VMPAL-…-T35
Duct separation to the
right of sub-base 1 - 40:
TS
 Ducts 1 and 3/5 separated
 VMPAL-…-T135