Specifications

2015/03 – Subject to change
25
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features – Pneumatic components
Electrical interlinking module
Illustration Code Type No. of solenoid coils
(valve positions)
Notes
Type of module
block 1-40: A
VMPAL-EVAP-10-…-2 2 (1), double solenoid Each solenoid coil must be assigned to a specific pin
of the multi-pin plug for the valve to be actuated.
Regardless of whether blanking plates or valves are
used, valve positions occupy
 one coil/address (single solenoid valves)
 two coils/addresses (double solenoid valves)
The electrical interlinking modules are colour-coded:
 Single solenoid – grey
 Double solenoid – black
Type of module
block 1-40: E
VMPAL-EVAP-14-…-2
Type of module
block 1-40: B
VMPAL-EVAP-20-…-2
Type of module
block 1-40: C
VMPAL-EVAP-10-…-1 1 (1), single solenoid
Type of module
block 1-40: F
VMPAL-EVAP-14-…-1
Type of module
block 1-40: D
VMPAL-EVAP-20-…-1
Type of module
block 1-40: A
VMPAL-EVAP-10-2-4 8 (4), double solenoid Each solenoid coil must be assigned to a specific pin
of the multi-pin plug for the valve to be actuated.
Regardless of whether blanking plates or valves are
used, valve positions occupy
 one coil/address (single solenoid valves)
 two coils/addresses (double solenoid valves)
The electrical interlinking modules are colour-coded:
 Single solenoid – grey
 Double solenoid – black
Type of module
block 1-40: E
VMPAL-EVAP-14-2-4
Type of module
block 1-40: C
VMPAL-EVAP-10-1-4 4 (4), single solenoid
Type of module
block 1-40: F
VMPAL-EVAP-14-1-4
Type of module
block 1-40: U
VMPAL-EVAP-20-SP – Electrical interlinking module for power supply
module