Specifications

2015/03 – Subject to change
39
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Technical data
-M- Flow rate
Up to 870 l/min
-K- Valve width
10 mm
14 mm
20 mm
-P- Voltage
24 V DC
General technical data
Valve terminal design Modular, valve sizes can be mixed
Electrical actuation Fieldbus Multi-pin plug IO-Link I-Port
Type of actuation Electrical
Nominal operating voltage [V DC] 24
Max. no. of valve positions 32
Max. number of pressure zones 9
Valve size [mm] 10, 14, 20
Switching position display LED
Pilot air supply Internal or external
Lubrication Life-time lubrication, PWIS-free (free of paint-wetting impairment substances)
Type of mounting Wall mounting
On H-rail to EN 60715
Mounting position Any (wall mounting)
Horizontal only (H-rail)
Manual override Non-detenting, detenting
Corrosion resistance class CRC
1)
3
Note on materials RoHS-compliant
Degree of protection IP65, IP67
1) Corrosion resistance class 3 according to Festo standard 940 070
Components subject to high corrosion stress. Externally visible parts with primarily functional surface requirements which are in direct contact with the surrounding industrial environment or media such as solvents
and cleaning agents.
Operating and environmental conditions
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating/
pilot medium
Lubricated operation possible (in which case lubricated operation will always be required)
Operating pressure [bar] –0.9 … +10
Pilot pressure [bar] 3 … 8
Ambient temperature [°C] –5 … +50
Temperature of medium [°C] –5 … +50
Storage temperature
1)
[°C] –20 … +40
Certification RCM trademark
1) Long-term storage