Specifications

Subject to change – 2015/03
4
è Internet: www.festo.com/catalog/...
Valve terminals MPA-L
Key features
Individual connection
Valves on individual sub-bases can
also be used for actuators further
away from the valve terminal. The
valves are screwed to an individual
sub-base made from die-cast alu
minium.
The electrical connection is estab
lished using a standard 4-pin M8
plug (EN 60947-5-2).
Further information
è Internet: vmpa1
Individual sub-base assembly
2
1
1 Mounting holes
horizontal
2 Mounting holes
vertical
The individual sub-base for wall
mounting is designed for integration
into a system or machine. It can be
mounted horizontally or vertically.
Multi-pin plug connection
The signal flow from the controller to
the valve terminal takes place via a
pre-assembled or self-assembled
multi-wire cable to the multi-pin plug
connection, which substantially
reduces installation time.
The valve terminal can be equipped
with max. 32 solenoid coils. This
corresponds to 2 to 32 valves.
Versions
 Sub-D connection
– Pre-assembled multi-pin cable
– Multi-pin cable for self-assembly
 Flat cable connection
 Terminal strip connection