INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Extra Large Height Adjustable Video Cart Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description XPAU
XPAU Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions XPAU DIMENSIONS +/- 3 TILT ADJUSTMENT 18.22 462.8 FROM INTERFACE TO FRONT OF CART HEIGHT ADJUST KNOB AND 1/2" DRILL DRIVE 34.57 878.0 33.23 844.0 20.43 518.9 7.87[200] MIN 31.50[800] MAX 15.75 [400.0] 65.43 1661.8 MAX HEIGHT TO CENTER OF DISPLAY 73.91 1877.4 47.77 1213.3 MIN HEIGHT TO CENTER OF DISPLAY 57.95 1472.
XPAU Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevesti
Installation Instructions XPAU TOOLS REQUIRED FOR INSTALLATION 1/8” (included) M5 (included) 3/16” (included) 5/32” (included) (security) #2 PARTS T (1) [Hardware bag] A (4) [Upright cover] D (2) [Column lower cover] TA (8) M4x16mm C (2) [Vertical rack B (2) bracket] [Interface upright] TB (6) M4x20mm TD (6) TE (6) M5x16mm M5x20mm E (1) [Column upper cover] TC (6) M4x25mm TF (6) M5x25mm F (1) [Column assembly] J (1) [Right cart leg] TG (6) M6x16mm TH (6) M6x25mm K (2) (Cable hook) G (1) [A
XPAU Installation Instructions Assembly And Installation (R) x 4 6 CAUTION: Attachment holes may be damaged if a power drill is used to insert button head cap screws. Screws should first be inserted and turned BY HAND with the hex key or with a hand-held screwdriver BEFORE using the hex head drill bit and power drill to complete the attachment. 4 (F) (H) Cart Assembly 1. Carefully set column assembly (F) on its left side. (See Figure 1) 2.
Installation Instructions XPAU Vertical Rack Bracket Installation (Optional) WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components installed to the accessory bracket (G) does not exceed 10 lbs (4.54 kg).
XPAU Installation Instructions Display Installation CAUTION: Using screws of improper length may damage your display! Proper screws will have adequate thread engagement without contacting bottom of display mounting holes. WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components located between the XPAU up to (and including) the display does not exceed 300 lbs (136 kg).
Installation Instructions XPAU 9. WARNING: Display may be very heavy! Ensure display may be safely lifted and maneuvered as required to install on cart. Failure to take adequate precautions can result in serious personal injury or damage to equipment! 7. Position latches on interface uprights so that they are in the “open” position. (See Figure 8) 8. Hang interface uprights (B) on head assembly. Figure 8) Move latches on interface uprights to the “closed” position to secure display to head assembly.
XPAU Installation Instructions Cable Management 5. Route cables along FCA clips to be used for cable management. (See Figure 14) NOTE: The following cable management options may vary 6. Use cable ties (V) to secure cables to FCA clips. (See Figure 14) based on type of display being mounted and user preference. 1. Use two 1/4-20 x 1/2” Phillips pan machine screws (L) to attach two cable hooks (K) to bottom of column assembly (F). (See Figure 12) 6 (V) 5 (F) (K) x 2 Figure 14 (L) x 2 1 7.
Installation Instructions 8. XPAU Wrap cables around cable hooks (K) as desired. (See Figure 16) 3. Use four #10-24 x 1/2” button head cap (X) or security (Y) screws to secure lower cover (D) to front of column assembly (F). (See Figure 18) (X) x 4 3 or 3 (Y) x 4 8 (K) x 2 Figure 18 Figure 16 Back of Column Covers Installation 4. Insert tabs on one side of upper cover (E) into corresponding slots on side of column assembly. (See Figure 19) 5.
XPAU Installation Instructions 6. Insert tabs on one side of lower cover (D) into corresponding slots on side of column assembly. (See Figure 20) Adjustments 7. Manipulate lower cover (D) so that it fits within lower cavity of column assembly and insert tabs on other side of lower cover (D) into corresponding slots on side of column assembly. (See Figure 20) 1. Turn height adjustment knob clockwise to raise display. (See Figure 22) 2. Turn height adjustment knob counterclockwise to lower display.
Installation Instructions XPAU Cart Use and Maintenance Pitch Adjustment WARNING: Removing pitch adjustment screws when the WARNING: Exceeding the weight capacity can result in display is installed will result in the display falling from the mount! Do NOT remove pitch adjustment screws completely while the display is installed to the mount! serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components located between the XPAU u
XPAU Installation Instructions 2. Always lock the wheels when the cart is not moving. 3. Check and tighten the hex nuts on the casters occasionally. (See Figure 26) These should be checked especially after use on uneven ground. x4 Figure 26 Removing Display from Cart 1. Remove any padlocks from interface uprights if installed. 2. Position latches on interface uprights so that they are in the “open” position.
Installation Instructions XPAU 15
XPAU Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002446 Rev02 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 10/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.