Manual

Advanced Controls
3 - 22 Enabling Power Options
3
Hibernate
Hibernate uses no power and saves all of your information on a part
of the HDD before it turns the system off. Although it saves the most
power it takes the longest time to return to full operation. You can set
your notebook to automatically enter Hibernate mode when the bat-
tery power is almost depleted. You will need to enable Hibernate
mode from the Hibernate tab in the Power Options control panel.
The system will resume from Hibernate mode by:
Pressing the power button.
Wakeup on modem ring.
Wakeup on LAN.
Figure 3 - 11
Enable
Hibernation