Manual

Advanced Controls
Display Devices 3 - 9
3
Display Devices
Besides the built-in LCD, you can also use an external CRT connect-
ed to the VGA port as your display device. You may also connect a
TV. The following are the display options:
1. The built-in LCD (Single).
2. A CRT (external monitor) connected to the external monitor
(CRT) port at the rear of the computer (Single).
3. A TV connected to the S-Video port at the rear of the computer
(Single).
4. The built-in LCD and a CRT showing the same Image (Mirror).
5. The built-in LCD and a TV showing the same Image (Mirror).
6. The built-in LCD and a CRT showing different Images
(Multimonitor).
7. The built-in LCD and a TV showing different Images
(Multimonitor).
8. A CRT and TV showing different images (Multimonitor) - see
sidebar note.
The table on the following page shows the available options.
5
CRT and TV Display
setting
If you intend to use a
TV and CRT as your
display devices, the TV
must be set as the pri-
mary Display_1, and
the CRT as the sec-
ondary Display_2
(Figure 3 - 8 on page
3-16).