Manual

Advanced Controls
3 - 12 Display Options
3
Switching/Enabling Displays (Driver Controls)
With the video driver installed, you also can use its built-in controls
to do the switching. If you have not installed the video driver, refer
to (see “What to Install” on page 4 - 2) for setup instructions. To
use the display options from the video driver control panel do the fol-
lowing:
1. Plug the CRT or TV into the appropriate port.
2. Following the instructions in “SiS Utility Tray/Manager” on
page 3 - 6, and choose Driver Mode Setting.
3. If the device listbox doesn’t show any plugged in devices
uncheck the Auto option.
Figure 3 - 5
Disable Auto