User Manual

3
Door reversal instruction
There is no spare parts required for door reversal job.
The following tool is required, flat screwdriver, phillips screwdriver, adjustable spanner,
socket wrench and 8mm socket.
1. Make sure the power cable is unplugged.
2. Remove the hinge cover with a flat screwdriver, remove the three screws that hold the
upper hinge on the door, then remove the upper hinge.
3. Lift up the door and remove it from the cabinet, keep it on a stable position.
4. Remove the screws that secure the lower hinge, then remove the hinge.
5. Remove the washer and nut that secure the pin shaft to the right hole on the lower
hinge, then remove the shaft
6. Insert the pin shaft into the left hole on the lower hinge, then secure the shaft with
the washer and nut.
7.Install the lower hinge on the left side of the cabinet.
8. Remove the screw that secures the door stop from the bottom right of the freezer
compartment door, then remove the door stop and install to the bottom left side.
9. Install the freezer compartment door.
10. Move the door bushing from the top right side of the freezer door to the top left side
of the door. And move the left hole cover to the right side.