User Manual

4
11. Remove the screw that secures the hinge screw hole cover from the top left side of
the cabinet and put it on the right side.
12. Secure the upper hinge with the three screws. Before you tighten the upper hinge
screws, make sure the door is level with the cabinet and rubber gasket has a good seal.
13. Install the hinge cover over the hinge on the top left side of the cabinet.
14. Remove the left screw caps and screws in handle, remove the right hole plugs.
15. Install the right hole plugs on the left side, and install the handle on the right, put
screw caps back on.