Manualshelf

User manual

ManualsBrandsChristie ManualsProjectors104-018101-XX
111112113114115116117118119120
Section 4: Maintenance
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual 4-11
020-100001-07 Rev. 1 (11-2009)
3. REPLACE FILTERS
Pull the old filters out of the projector and discard. Do not reuse filters. Insert the
new filters with the wired side in. See Figure 4.7.
Figure 4.9. Insert New Filters
4. REPLACE ACCESS PANELS
Replace the two (2) filter access panels and tighten the screws loosened in step 1.
A variety of lenses can accommodate different throw distances and specific types of
installations. Refer to Section 6 - Specifications for details. To change a lens, follow
the steps below.
Turn off the projector, cool and unplug
NOTE: If necessary, a lens can be swapped out while the projector is running, but
this can result in dust being drawn into the projector. Avoid if possible.
Before removing or installing any lens, turn off the projector and allow the fans to
cool the lamp before unplugging the projector. Ensure that the lens cap is on.
WARNING
Unplug the projector.
4.5 Replacing the
Projection Lens
STEP 1