User manual

Section 4: Maintenance
4-12 Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
Figure 4.10. Lens Assembly
Install the lens cap and press the lens release button
See Figure 4.11.
Figure 4.11. Depressing Lens Release
Rotate the lens
Rotate the lens counter-clockwise until
the tabs are free from the lens retainer
ring, see A in Figure 4.12.
NOTE: The connector slide assembly
allows the connector to move as the
lens is rotated.
Pull lens out
Lens connectors will disconnect when
you pull the lens straight out from the
projector, see B in Figure 4.12.
Insert new lens.
NOTE: Remove small rear cap! Keep front cap on.
STEP 2 
Figure 4.12. Rotating the Lens
STEP 3 
STEP 4 
STEP 5 