User manual

Appendix D

Optional Input Modules

Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual D-1

020-100001-07 Rev. 1 (11-2009)

There are many optional input modules and accessories currently available for this

projector. Contact your dealer for a complete and up-to-date listing.

The RGB500 Input Module may be installed in this projector, a Marquee Signal

Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input

signals from computers or other RGB source devices.

RGB500 Features

 Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or

separate horizontal and vertical sync), up to 500 MHz bandwidth

 Accepts YPbPr, composite (on green) and Y/C (on red/blue)

 BNC connectors for RGB signal inputs

NOTE: The audio connectors are not functional.

The RGB400 Buffered Amplifier Input Module may be installed in this projector, in a

Marquee Signal Switcher or in a Marquee Case/Power Supply. Connect three-, four-, or

five-wire RGB video signals of up to 400 MHz bandwidth, signals typically produced by

high-resolution computer or workstations. The buffering capability of the module enables

the incoming signal to be sent to a remote destination. Inputs are 75

 terminated.

RGB400BA Features

 Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or

separate horizontal and vertical sync)

 Accepts YPbPr, composite (on green) and Y/C (on red/blue)

 BNC connectors for RGB signal inputs

 Buffered signals to a remote destination

NOTE: The audio connectors are not functional.

RGB500 Input Module 

38-804606-

RGB400BA Input Module 

38-804610-