User manual
Appendix E: Menu Tree
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual E-3
020-100001-07 Rev.1 (11-2009)
Main Menu
1. Size & Position
2. Image Settings
3. Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP and Switching
8. Test Pattern
Size & Position
1. Resize Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. H-Position
7. V-Position
8. Reserved
9. Reserved
0. Advanced Size & Position
Advanced Size & Position
Active Input Window
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play Display (EDID)
Channel Setup
This is a list of all of the
channels that have been
defined for this projector.
Channel Copy Delete
1. Copy
2. Delete
3 Delete Locked Only
4. Delete All Channels
See Page E-4 for 4.
Configuration
Image Settings
1. Contrast
2. Brightness
3. Gamma
4. Filter
5. Detail
6. Noise Reduction
7. Color Space
8. Video options
9. Input levels
0. Advanced Image Settings
Input Levels
1. Auto Input Level
2. Red<Pr> Blacklevel
3. Red<Pr> Input Drive
4. Green<Y> Blacklevel
5. Green<Y> Input Drive
6. Blue<Pb> Blacklevel
7. Blue<Pb> Input Drive
8. Auto Color Enable
9. Clamp Location
0. Peak Detector
Color Enable
Advanced Image Settings
1. Gamma Table
2. Select Color Adjustment
3. Color Temperature
4. Optical Aperture
5. Reserved
6. Simulation 3D
7. Motion Filter
8. Film Mode Threshold
9. Detail Threshold
0. 3D Source *
Floating Inputs
Simulation 3D
Frame Delay Monitor
1. Frame Delay
2. Dark Interval *
3. 3D Sync Input *
4. 3D Sync Output *
5. 3D Stereo Sync Delay *
6. Frame Lock Enable *
7. 3D Source *
PIP and Switching
1. Swap Main and PIP images
2. PIP Enable
3. PIP Size & Position
4. PIP Image Settings
5. PIP Border Width
6. PIP Border Color
7. Image Optimization
8. Reserved
9. Numbers Select Main Image
PIP Size & Position
Active Input Window
1. Position Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. PIP H-Position
7. PIP V-Position
8. Aspect Ratio Presets
9. Reserved
0. Advanced Size & Position
PIP Image Settings
1. Contrast
2. Brightness
3. Gamma
4. Filter
5. Detail
6. Noise Reduction
7. Color Space
8. Video options
9. Input levels
0. Advanced Image Settings
PIP Video options
1. Enable Decoder AGC
2. Video Standard
3. Input Video Black
4. Color
5. Tint
6. Decoder/Luma Delay
Advanced Size & Position
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play Display (EDID)
PIP Input Levels
1. Auto Input Level
2. Red<Pr> Blacklevel
3. Red<Pr> Input Drive
4. Green<Y> Blacklevel
5. Green<Y> Input Drive
6. Blue<Pb> Blacklevel
7. Blue<Pb> Input Drive
8. Auto Color Enable
9. Clamp Location
0. Peak Detector
Color Enable
PIP Advanced Size & Position
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play Display (EDID)
Channel Edit
1. Name
2. Number
3. Input
4. In Menu
5. Auto Source
6. Locked
7. Previous Channel
8. Next Channel
Sync Type
H-Sync
V—Sync
Interlace
Press <Enter>
on a channel
* Mirage Only
NOTE: No PIP on WU models.
9. Numbers Select Main Image
is the only choice on “Switching”
menu.
Video Options
1. Enable Decoder AGC
2. Video Standard
3. Input Video Black
4. Color
5. Tint
6. Decoder Luma Delay
Press <Function> on a channel
Lamp
Lamp Hours
Lamp S/N
1. Lamp Message
2. Lamp Limit
3. Lamp Mode
4. Power
5. Intensity
6. Optical Aperture
7. Lamp History
8. Change Lamp