User manual

Section 3

Operation

Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual 3-1

020-100001-07 Rev. 1 (11-2009)

This section explains how to effectively operate the projector once it has been

installed. It is recommended that you read this section and familiarize yourself with

the components and the available menu options before you begin using your projector

for the first time.

The built-in keypad is located at the back of the projector, beside the input panel. Use

it similarly to the IR remote to control the projector. A status LED display is also

included on this keypad for monitoring projector status.

The AC receptacle is located at the back of the projector just below the input panel.

Use this outlet to plug in an appropriately rated line cord. Refer to Section 6 –

Specifications for details.

Located on the underside of the projector are two fully adjustable feet. Raise or lower

these feet when positioning the projector to ensure it is level on all sides so the

displayed image will appear rectangular without any keystone.

NOTE: The third foot, located at the rear of the projector (underside) is not

adjustable.

Refer to Section 2 - Projector Position and Mounting for instructions on how to

adjust the projector’s feet.

3.1 About the

Projector

Built-in Ke

ad 

AC Rece

tacle 

ustable Feet 