User manual

Section 3: Operation
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual 3-13
020-100001-07 Rev. 1 (11-2009)
1.
2.
3.
4.
5.
6.
7.
8.
9.
0.
Baud Rate for RS232
Baud Rate for RS422
Projector
Network Routing
Ethernet Settings
Broadcast Key
Backlight
Front IR
Back IR
Wired Keypad
115200
115200
004
All Joined
Off
On
On
Communications
Separate
RS232 and RS422 Joined
Ethernet Joined
All Joined
RS232 and
1.
2.
3.
4.
Example of Pull-Down List
If you prefer to quickly scroll through a list without first pulling it down, highlight the
option and use
or
. Press
when the desired choice appears.
NOTES: 1) Press
or
to jump between pages in an extra long pull-down
list. 2) Press
Exi t
while in a pull-down list to cancel any change.
ACTIVATE THE EDIT WINDOW: To enter or edit text, highlight the desired parameter
(such as a channel name) and press
to activate its adjacent edit window. Any
previously entered text is displayed with its first character highlighted in a square
cursor, signifying that this character is ready for editing.
NAVIGATE WITHIN THE EDIT WINDOW: Press to move the cursor forward or
to move the cursor backwards as desired.
EDIT A CHARACTER: To edit a highlighted
character, use
and
to scroll
through the alphabet, numbers, spaces and
punctuation available. When the character
you need appears, press
to select it—
the cursor will move to the next character
of current text, if present. Note that you
can also enter a number directly from the
keypad—it will be accepted and the cursor
will move on.
ADD OR DELETE A CHARACTER OR SPACE: To insert a space at the cursor location,
press
Func
. To delete a highlighted character (or space), press
Fu n c
.
PRESS (ENTER) WHEN FINISHED: To accept edits and leave the edit window,
press
(Enter).
Editin
g
Text 
Figure 3.3. Entering Text