User manual
Section 3: Operation
3-16 Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
NOTES: 1) The current
channel is highlighted upon
entering the channel list,
or, if this channel is not
displayed here, the first
channel in the list is
highlighted. 2) Channels
created automatically do
not appear in the channel
list unless a parameter for
the channel has been changed.
All available channels are listed in the Channel Setup menu, which describes how
each channel can be accessed and which serves as the gateway for editing, copying
and deleting channels.
Press
Menu
from the
presentation level to display
the Main menu. To display the
Channel Setup menu,
press
3
, or move the
highlight to the Channel Setup
option and press
. The
Channel Setup menu will
appear (see sample at right),
with the active channel
highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU? This menu
lists all channels defined so far and indicates where they
are connected on the input panel. The far left column lists
channel numbers currently defined. The values in the far
right columns indicate horizontal and vertical
frequencies—if someone has defined a name for this
channel, it appears here instead. Remaining columns contain details pertaining to each
channel setup, such as its switcher number (always 0 = projector), slot location, a
variety of icons indicating access to each channel, and an abbreviated description of
each signal type. See Editing a Channel Setup for details.
NOTE: If you have more than a handful of channels, use
and to see the
remaining channels not visible in the initial display of channels.
SIGNAL TYPE — Either channel list, whether the
Channel
key list or the Channel Setup
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an “i” (interlaced signals) or “p” (progressive
signal“). See Table 3.2.
All Channels Appear in the
Channel Setup Menu
What Channels
Are Defined So Far?