User manual

Section 3: Operation
3-18 Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
Figure 3.5. Deleting a Channel
TO DELETE MULTIPLE CHANNELS highlight any channel in the Channel Setup menu
and press
Fu n c
to go to the Channel Copy/Delete submenu. Select “Delete Unlocked
Only” and press
to delete all unlocked channels. Select “Delete All Channels” to
delete all channels, even those that are locked. In either case, the current channel will
remain but will be redefined from projector defaults.
NOTE: For any deletion, a window will appear to confirm the deletion of the desired
channel. Select “Cancel” (default) if you don’t want to delete after all.
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
Press
Menu
from the presentation level to display the main menu. To display the
Channel Setup menu, press
3
, or move the highlight to the Channel Setup option
and press
. The Channel Setup menu will appear.
To edit parameters shown in the Channel Setup menu, select the relevant channel and
press
. The Channel Edit menu will appear similar to the sample shown below.
Channel Edit Menu (SAMPLE)
If desired, review and/or edit the following channel setups in the Channel Edit menu:

CHANNEL NAME: An alphanumeric label can be defined and/or changed here.
Channel names can be up to 12 characters in length.

CHANNEL NUMBER: A two-digit channel number can be changed here.
Editin
g
a Channel Setu
p

CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
CHANNEL EDIT — STEP 3