User manual

Section 3: Operation
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual 3-21
020-100001-07 Rev. 1 (11-2009)
 Select
“NO RESIZING” to display the image in its native resolution, which may or
may not match the projector’s resolution. For example, for a source with a native
resolution of 800 x 600, “No Resizing” in an SXGA+ projector will use the central
800 x 600 pixels and have a black border—the black border areas are unused areas.
See below.
 Select “FULL SIZE” to use all
pixels for displaying the image,
regardless of source or original
aspect ratio. Incoming source
material having a different
aspect ratio than the projector
will be stretched for display.
 Select
“FULL WIDTH” to fill the
projector’s display from left-to-
right without changing the
original aspect ratio of the
image. Depending on the
source, data at the top and
bottom may be discarded
(cropped), or the display may
have black borders at the top
and bottom (called “letterboxed”).
 Select
“FULL HEIGHT” to fill the display from top-to-bottom. Depending on the
source, this may create borders.
 Select “ANAMORPHIC” to display an anamorphic
image in its native 16:9 aspect ratio. The image will